Brother DCP-8110DN 제품 안전 매뉴얼 - 페이지 4

{카테고리_이름} Brother DCP-8110DN에 대한 제품 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-8110DN 22 페이지. Printer
Brother DCP-8110DN에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 고급 사용자 설명서 (50 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (23 페이지), 사용자 설명서 (23 페이지), 제품 안전 매뉴얼 (23 페이지), 고급 사용자 설명서 (39 페이지)

CAUTION

Avoid placing your product in a high-traffic area. If you must place it in a high-traffic area, ensure

that the product is in a safe location where it cannot be accidentally knocked-over, which could

cause injury to you or others and serious damage to the product. Also ensure that cords are

secured so as not to pose a tripping hazard.

DO NOT eat the silica gel pack. Please throw away. If ingested seek medical attention

immediately.

DO NOT place heavy objects on the product. DO NOT place this product on an unstable cart,

stand, or table, particularly if children are expected to be near the product. The product is heavy

and may fall, causing injury to you or others, and serious damage to the product. For MFC and

DCP products, there is an added risk of injury if the scanner glass should break.

Important

• DO NOT put objects on top of the product. Doing so could increase the risk of overheating

should the product malfunction.

• DO NOT place your product next to devices that contain magnets or generate magnetic fields.

Doing so may interfere with the operation of the product, causing print quality problems.

• DO NOT place your product next to sources of interference, such as speakers or the base units

of non Brother cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic

timers. Disruption of power can delete information from the product's memory.

• DO NOT connect your product to an AC power outlet on the same circuit as large appliances

or other equipment that requires a significant amount of electricity to operate. Operating this

product in conjunction with the other product(s) could create an overvoltage, tripping your

circuit breaker or blowing your fuse.