AEG 84602 G 사용 설명서 - 페이지 19

{카테고리_이름} AEG 84602 G에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 84602 G 26 페이지.

Fitting the hob to the worktop

Before fitting the hob into

the cut out, an adhesive seal

must be fitted to the

underside outside edge of the

hob. It is essential that no

gaps are left in this seal in

order to prevent spillage near

the hob seeping into the

cabinet below.

1) Remove the pan supports,

the burners caps and

crowns and turn the hob

upside down, taking care

the ignition candles are

not damaged in this

operation.

2) Place the sealing gasket

all around the glass top

edge as shown in the

diagram.

3) Fit the hob in the cut out

and push it down until

the glass top and the

working top make

contact, as shown in the

diagram.

FO 2108

FO 2107

Building in

A) Sealing gasket