AEG 86700 K-IN 설치 및 운영 지침 매뉴얼 - 페이지 23

{카테고리_이름} AEG 86700 K-IN에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 86700 K-IN 31 페이지. Ceramic glass hob

• In order to facilitate access if servicing is required, there must be a

space the size of the cut-out section in the worktop and 150mm high

under the hob. Anything installed in this area, e.g. anti-shock protec-

tion, must be easily removable.

Sticking the seal in the rabbet

• Clean the rabbet in the work surface.

• Stick the one-sided self-adhesive sealing tape supplied onto the up-

per surface of the rabbet along the edges of the cut-out section.

– Cut the sealing tape into four pieces relating to the length of the

edges of the rabbet.

– For the four corners of the rabbet the ends of the sealing tapes

must be cut into mitres. Do not stick the ends over one another.

– Stick the sealing tape flush into the corner of the rabbet, so that no

silicon compound can get under the glass ceramic when grouting.

– Don't stretch the tapes when sticking them on.