AEG 88100K 설치 및 운영 지침 매뉴얼 - 페이지 23

{카테고리_이름} AEG 88100K에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 88100K 43 페이지. Ceramic glass induction hob

Cooking without the Automatic Heating-Up Function

1. For heating up/browning, select a high power.

2. As soon as steam forms or the fat is hot, switch back to the required

heat setting for the remainder of the cooking time.

3. Reset to zero in order to end cooking.

Note:

When cooking with the induction cooking zone you should take into

account that

– the heating-up times are reduced by the direct energy transfer to the

pan!

– the cooking process stops immediately after the cooking zone is

switched off (no boiling over!)

With the exception of the "On/Off" sensor field the control panel can

be locked at any required time during cooking in order to prevent ad-

justing the settings such as when wiping over with a cloth. This

function is also suitable as a child safety feature.

1. Touch the „lock" sensor field until the control indicator comes on.

2. To release the lock touch the „lock" sensor field again continuously un-

til the control indicator goes out.

Child safety feature! If the hob is completely switched off using the

"On/Off" sensor field while the lock is on, then the lock will still be ac-

tive when the hob is switched on again. To reactivate the cooking

zones, the locking function must be cancelled as described above.