Brother DCP-J1100DW 참조 매뉴얼 - 페이지 15
{카테고리_이름} Brother DCP-J1100DW에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J1100DW 31 페이지.
Brother DCP-J1100DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 참조 매뉴얼 (31 페이지), 제품 안전 매뉴얼 (18 페이지), 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지)
페이지 인쇄
7
Fax
Before Faxing
Telephone Line Interference/
VoIP
Related Models:
MFC-J1300DW
If you are having problems sending or
receiving a fax due to possible interference on
the telephone line or if you are using a VoIP
system, we recommend changing the modem
speed to minimise errors in fax operations.
1
Press
[Settings] > [All
Settings] > [Initial Setup] >
[Compatibility].
2
Press the option you want.
• [Basic(for VoIP)] reduces the
modem speed to 9,600 bps and turns
off colour fax receiving and Error
Correction Mode (ECM), except for
colour fax-sending. Unless
interference is a recurring problem on
your telephone line, you may prefer
to use it only when needed.
To improve compatibility with most
VoIP services, Brother recommends
changing the compatibility setting to
[Basic(for VoIP)].
• [Normal] sets the modem speed at
14,400 bps.
3
Press
.
• VoIP (Voice over IP) is a type of phone
system that uses an Internet
connection, rather than a traditional
phone line.
Send a Fax
Related Models:
MFC-J1300DW
1
Load your document in the ADF or place
it on the scanner glass.
2
Press
[Fax].
If [Fax Preview] is set to [On], press
[Fax] > [Sending Faxes].
The touchscreen displays:
3
Enter the fax number in one of the
following ways:
• Dial Pad (Enter the fax number
manually.)
Press all digits of the number using
the touchscreen.
• Call History
Press [Call History].
Press [Redial], [Outgoing
Call] or [Caller ID History].
If you select [Outgoing Call] or
[Caller ID History], select the
number you want, and then press
[Apply].
• Address Book
14