Brother DCP-J152W 빠른 설정 매뉴얼 - 페이지 27

{카테고리_이름} Brother DCP-J152W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J152W 33 페이지.
Brother DCP-J152W에 대해서도 마찬가지입니다: 고급 사용자 설명서 (48 페이지), 제품 안전 매뉴얼 (16 페이지)

Brother DCP-J152W 빠른 설정 매뉴얼
Wireless Network
Install the drivers and software
13
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
NOTE
For Mac OS X v10.6.0 to 10.6.7 users, upgrade to
Mac OS X v10.6.8 - 10.8.x.
14
Install MFL-Pro Suite
a
Put the CD-ROM into your CD-ROM drive.
b
Double-click the Start Here OSX icon to install.
If the model name screen appears, choose
your machine.
c
Choose Wireless Network Connection, and
then click Next.
d
After the installation, the Brother software will
search for the Brother device. This will take a
few moments to complete.
(Mac OS X v10.6.8, 10.7.x, 10.8.x)
e
Choose your machine from the list, and then
click Next.
NOTE
If your wireless settings fail, the Wireless Device
Setup Wizard screen appears. Follow the
on-screen instructions to complete the wireless
configuration.
f
The installation of the Brother drivers will
automatically start. Please wait for the software
to install.
NOTE
• You can find your machine's MAC Address
(Ethernet Address) and IP Address by printing
out the Network Configuration Report. See
Print the Network Configuration Report in the
Software and Network User's Guide.
• If the Setup Network "Scan to" name screen
appears, follow the instructions below.
1) Enter a name for your Macintosh (up to
15 characters long).
2) Click Next. Go to g.
The name you enter will appear on the
machine's LCD when you press SCAN and
choose a scan option. For more information,
see Configure Network Scanning for Macintosh
in the Software and Network User's Guide.
Macintosh
27