Brother DCP-J172W 고급 사용자 설명서 - 페이지 20

{카테고리_이름} Brother DCP-J172W에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J172W 25 페이지.
Brother DCP-J172W에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (31 페이지)

Brother DCP-J172W 고급 사용자 설명서

Checking the ink volume

Although an ink volume icon appears on the
Touchscreen, you can use the ink menu to
see a large graph showing the ink left in each
cartridge.
a
Press
.
NOTE
You can also press
General Setup and Ink.
b
Press s or t to display Ink Volume.
c
Press Ink Volume.
The Touchscreen shows the ink volume.
NOTE
When the ink cartridge is near the end of
its life or having a problem, one of the
following icons is displayed.
The ink level is low.
The ink cartridge is at the end of its life.
There is a problem with the ink
cartridge.
d
Press
.
NOTE
You can check the ink volume from your
computer.
(See Software and Network User's
Guide.)
16
A
(Settings),
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
correctly package your machine. Damage
caused to your machine during transit may
not be covered by your warranty.
The machine should be adequately insured
with the carrier.
IMPORTANT
It is important to allow the machine to
"park" the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noises have stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Unplug the machine from the electrical
socket.
b
Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
c
Unplug the interface cable from the
machine, if it is connected.
A