Brother DCP-J525W 빠른 설정 매뉴얼 - 페이지 11

{카테고리_이름} Brother DCP-J525W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J525W 32 페이지.

USB

For USB interface users

Before you install

Make sure your machine is connected to the power

and your Macintosh is ON. You must be logged on

with Administrator rights.

Note

For Mac OS X 10.4.0 to 10.4.10 users, upgrade to

Mac OS X 10.4.11 - 10.6.x.

Connect the USB cable

IMPORTANT

• DO NOT connect the machine to a USB port

on a keyboard or a non-powered USB hub.

• Connect the machine directly to your

Macintosh.

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

(Mac OS X 10.4.11, 10.5.x, 10.6.x)

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Macintosh

Connect the USB cable to the USB port

marked with a

symbol. You will find the

USB port inside the machine as shown below.

USB

Carefully guide the USB cable into the cable

channel and out the back of the machine.

Connect the cable to your Macintosh.

IMPORTANT