Brother DCP-J572DW 참조 매뉴얼 - 페이지 25

{카테고리_이름} Brother DCP-J572DW에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J572DW 32 페이지. Brief explanations for routine operations
Brother DCP-J572DW에 대해서도 마찬가지입니다: 참조 매뉴얼 (34 페이지), 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지), 매뉴얼 (19 페이지), 빠른 설정 매뉴얼 (2 페이지), 제품 안전 매뉴얼 (21 페이지)

페이지 인쇄

Error Message

Out of Fax Memory Print the faxes stored in the memory. For more detailed information,

Out of Memory

Paper Size

Mismatch

Replace Ink

Tray not detected Slowly push the paper tray completely into the machine.

Tray Settings

Action

see the Online User's Guide: Print a Fax Stored in the Machine's

Memory.

If a fax-sending or copy operation is in progress:

• Press Stop/Exit and wait until the other operations that are in

progress finish, and then try again.

• Press c to select Partial Print to copy the pages scanned so

far.

• Print the faxes stored in the memory.

For more detailed information, see the Online User's Guide: Print a

Fax Stored in the Machine's Memory.

1. Check that the paper size you selected on the machine's display

matches the size of the paper in the tray.

For more detailed information, see the Online User's Guide:

Change the Paper Size and Paper Type.

2. Make sure you loaded the paper in a Portrait position, by setting

the paper guides at the indicators for your paper size.

For more detailed information, see the Online User's Guide: Load

Paper.

3. After you have checked the paper size and the paper position,

follow the LCD instructions.

If printing from your computer, make sure the paper size you selected

in the printer driver matches the size of paper in the tray.

For more detailed information, see the Online User's Guide: Print

Settings (Windows

) or Print Options (Mac).

One or more of the ink cartridges have reached the end of their lives.

Replace the ink cartridges.

For more detailed information, see the Online User's Guide: Replace

the Ink Cartridges.

• You can still scan even if the ink is low or needs to be replaced.

Paper or a foreign object has prevented the paper tray from being

inserted correctly.

Pull the paper tray out of the machine, and remove the jammed paper

or foreign object. If you cannot find or remove the jammed paper, see

the Online User's Guide: Printer Jam or Paper Jam.

This message is displayed when the setting to confirm the paper type

and size is enabled.

To not display this confirmation message, change the setting to Off.

For more detailed information, see the Online User's Guide: Change

the Check Paper Size Setting.