Brother DCP-J772DW 매뉴얼 - 페이지 14

{카테고리_이름} Brother DCP-J772DW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J772DW 31 페이지. Brief explanations for routine operations
Brother DCP-J772DW에 대해서도 마찬가지입니다: 매뉴얼 (19 페이지), 빠른 설정 매뉴얼 (2 페이지), 제품 안전 매뉴얼 (21 페이지)

페이지 인쇄

Scan

Before Scanning

Before attempting to scan, confirm the

following:

• Make sure you have installed the Brother

software and drivers.

• Make sure the USB or network cable is

connected correctly, or that you are

connected to the network using your

wireless access point/router.

Scan from Your

Computer

There are several ways you can use your

computer to scan photos and documents on

your Brother machine. Use the software

applications provided by Brother, or use your

favourite scanning application.

For more information, see the Online User's

Guide: Scan from Your Computer (Windows

or Scan from Your Computer (Mac).

Scan Using the Scan

Button on the Machine

Load your document.

Press [Scan] > [to PC] > [to

File].

If the machine is connected over the

network, press a or b to display the

computer where you want to send data,

and then press the computer name.

If the LCD prompts you to enter a PIN,

use the LCD to enter the four-digit PIN for

the computer, and then press [OK].

Do one of the following:

• To change the settings, press

[Options] or [Set at Device],

and then go to the next step.

• Press [Start] to start scanning

without changing additional settings.

The machine starts scanning. If using

the machine's scanner glass, follow

the LCD instructions to complete the

scanning job.

Change the scan settings you want to

change, such as scan type, resolution,

file type and document size, if needed.

When finished press [OK].

Press [Start].

The machine starts scanning. If using

the machine's scanner glass, follow the

LCD instructions to complete the

scanning job.

)