Brother DCP-L2508DW 빠른 설정 매뉴얼

{카테고리_이름} Brother DCP-L2508DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-L2508DW 2 페이지.

Brother DCP-L2508DW 빠른 설정 매뉴얼
CHN-ENG
Version 0
EN
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
USB Interface Cable
1
Remove the packing materials and install the toner cartridge and drum unit assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Quick Setup Guide
DCP-L2508DW / DCP-L2518DW / DCP-L2628DW / DCP-L2548DW /
DCP-L2648DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Operation Videos:
www.95105369.com
Toner Cartridge and Drum Unit
Assembly
Quick Setup Guide
Front
Installation & Using Videos
Product Safety Guide
1
2
Remove the orange part.
Do not exceed this mark.
Adjust the paper
guides.
NOTE:
• The available connection interfaces vary depending on the model.
If you use a wired connection, you must purchase the correct cable for
the interface you want to use.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
• Network cable (DCP-L2508DW/DCP-L2628DW/DCP-L2548DW/
DCP-L2648DW)
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The screens and images in this Quick Setup Guide show the
DCP-L2648DW.
• Save all packing materials and the box in case you must ship your
machine.
1
Push firmly.
1