AEG 949 597 382 00 사용자 설명서 - 페이지 18
{카테고리_이름} AEG 949 597 382 00에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 949 597 382 00 24 페이지.
페이지 인쇄
18
www.aeg.com
Problem
You cannot select the maxi‐
mum heat setting for one of
the cooking zones.
You cannot activate one of
the cooking zones.
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
The hob deactivates.
Residual heat indicator does
not come on.
Hob²Hood does not work.
The sensor fields become
hot.
There is no sound when you
touch the panel sensor
fields.
comes on.
and a number come on.
Possible cause
You touched 2 or more sen‐
sor fields at the same time.
Pause operates.
There is water or fat stains
on the control panel.
The other zones consume
the maximum available pow‐
er.
Your hob works properly.
You put something on one or
more sensor fields.
You put something on the
sensor field
.
The zone is not hot because
it operated only for a short
time or the sensor is dam‐
aged.
You covered the control pan‐
el.
The cookware is too large or
you put it too near to the
controls.
The sounds are deactivated. Activate the sounds. Refer to
Child Safety Device or Lock
operates.
There is an error in the hob.
Remedy
Touch only one sensor field.
Refer to "Daily use".
Clean the control panel.
Reduce the heat setting of
the other cooking zones con‐
nected to the same phase.
Refer to "Power manage‐
ment".
Remove the object from the
sensor fields.
Remove the object from the
sensor field.
If the zone operated suffi‐
ciently long to be hot, speak
to an Authorised Service
Centre.
Remove the object from the
control panel.
Put large cookware on the
rear zones if possible.
"Daily use".
Refer to "Daily use".
Deactivate the hob and acti‐
vate it again after 30 sec‐
onds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin‐
ues, speak to an Authorised
Service Centre.