Brother DCP-L2537DW 빠른 설정 매뉴얼
{카테고리_이름} Brother DCP-L2537DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-L2537DW 2 페이지. Brief explanations for routine operations
Brother DCP-L2537DW에 대해서도 마찬가지입니다: 참조 매뉴얼 (23 페이지), 참조 매뉴얼 (23 페이지), 참조 매뉴얼 (24 페이지), 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지)
페이지 인쇄
MFC-L2712DW / MFC-L2712DN / MFC-L2710DW / MFC-L2710DN /
DCP-L2552DN / DCP-L2550DN / DCP-L2537DW / DCP-L2532DW /
DCP-L2530DW / DCP-L2512D / DCP-L2510D
Quick Setup Guide
Unpack the machine and check the components
Drum Unit and Inbox Toner Cartridge
Watch our Video FAQs for
help with setting up your
Brother machine:
support.brother.com/videos.
1
Remove the packing materials and install the drum unit and toner cartridge assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
5
Select your language (if needed)
1.
(for DCP models)
a. Press Menu.
b. Press ▲ or ▼ to display [Initial Setup], and then press OK.
c. Press ▲ or ▼ to display [Local Language], and then press OK.
(for MFC models) Press Menu, 0, 0.
2.
Press ▲ or ▼ to select your language, and then press OK.
3.
Press Stop/Exit.
(For U.K.)
(For Others)
Telephone Line Cord
(For MFC models)
Brother Installation Disc
Adjust the paper
Front
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: support.brother.com/manuals.
AC Power Cord
(only for certain models)
Quick Setup Guide
Product Safety Guide
1
2
1
Remove the orange part.
Do not exceed this mark.
guides.
Select your country/language
4
(Initial setup only)
After turning the machine on, you may be required to set your country
or language (depending on your machine).
If required, follow the on-screen instructions.
NOTE:
• The components included in the box may differ depending on your country.
• The available connection interfaces vary depending on the model.
• Interface cables are not included. You must purchase the correct interface cable if
you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The illustrations in this Quick Setup Guide show the MFC-L2710DW.
Secure Network Access
Your machine's default password is on the label on the back of the
machine (preceded by "Pwd").
We strongly recommend you change it to protect your machine
from unauthorised access.
Push firmly.
D01H7V001-00
UK
Version B