Brother DCP-L2600D 빠른 설정 매뉴얼

{카테고리_이름} Brother DCP-L2600D에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-L2600D 2 페이지.
Brother DCP-L2600D에 대해서도 마찬가지입니다: 제품 안전 매뉴얼 (19 페이지), 빠른 설정 매뉴얼 (2 페이지), 제품 안전 매뉴얼 (19 페이지)

페이지 인쇄
Brother DCP-L2600D 빠른 설정 매뉴얼
D02UV1001-00
OCE/ASA/GLF/TWN
Version 0
EN
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
1
Remove the packing materials and install the toner cartridge and drum unit assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Quick Setup Guide
HL-L2464DW / DCP-L2605DW / DCP-L2600D / DCP-L2625DW / DCP-L2640DW /
DCP-L2680DW / HL-L2480DW / MFC-L2800DW / MFC-L2805DW / MFC-L2806DW / MFC-L2820DW /
MFC-L2861DW / MFC-L2885DW / MFC-L2886DW / MFC-L2880DW / MFC-L2880DWXL / MFC-L2920DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Toner Cartridge and Drum Unit
Assembly
Quick Setup Guide
Front
AC Power Cord
Product Safety Guide
1
2
Remove the orange part.
Do not exceed this mark.
Adjust the paper
guides.
NOTE:
• The components included in the box may differ depending on your
country.
• The available connection interfaces vary depending on the model.
If you use a wired connection, you must purchase the correct cable for
the interface you want to use.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
• Network cable (for wired network models only)
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The screens and images in this Quick Setup Guide show the
MFC-L2885DW.
• Save all packing materials and the box in case you must ship your
machine.
1
Push firmly.
4
Select your country/language
(Initial setup only)
After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.