AEG 95601 G 사용 설명서 - 페이지 16
{카테고리_이름} AEG 95601 G에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 95601 G 28 페이지. Gas hob
AEG 95601 G에 대해서도 마찬가지입니다: 작동 및 설치 지침 (26 페이지), 운영 및 설치 매뉴얼 (22 페이지), 작동 및 설치 지침 (22 페이지)
페이지 인쇄
On the end of the shaft, which includes the GJ 1/2" threaded elbow, adjustment is fixed so
that the washer is fitted between the components as shown in the diagram. Screw the
parts together without using excessive force.
Gas Connection
Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or
copper.
The connection should be suitable for connecting to RC 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test is
carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.
It is important to install the elbow correctly, with the shoulder on the end of the thread,
fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of gas.
16
FO 0264
A) End of shaft with nut
B) Washer
C) Elbow
FO 0814