Brother DCP-T500W 고급 사용자 설명서 - 페이지 7
{카테고리_이름} Brother DCP-T500W에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-T500W 46 페이지.
Brother DCP-T500W에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지), 고급 사용자 설명서 (39 페이지), 고급 사용자 설명서 (40 페이지)
페이지 인쇄
Sleep Mode
You can choose how long the machine must
be idle (up to 60 minutes) before it goes into
Sleep Mode. The timer will restart if any
operation is carried out on the machine.
(MFC-T800W)
a
Press Menú (Menu), 2, 6.
b
Press a or b to choose 1 Min, 2 Mins,
3 Mins, 5 Mins, 10 Mins, 30 Mins
or 60 Mins.
Press OK.
c
Press Detener/Salir (Stop/Exit).
(DCP-T300, DCP-T500W and DCP-T700W)
a
Press Menú (Menu).
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose 3.Sleep Mode.
Press OK.
d
Press a or b to choose 1 Min, 2 Mins,
3 Mins, 5 Mins, 10 Mins, 30 Mins
or 60 Mins, which is the length of time
the machine is idle before entering
Sleep Mode.
Press OK.
e
Press Detener/Salir (Stop/Exit).
Auto Power Off
1
(DCP models only)
The Auto Power Off feature will turn off the
machine after it has been in Sleep Mode for
the number of hours you set. When this
feature is Off, the machine will remain in
1
Sleep Mode and not turn itself off.
The default setting is Off.
To turn on the machine after the Auto Power
Off feature has turned it off, press Power
On/Off.
NOTE
(DCP-T500W and DCP-T700W)
The machine will not power off
automatically when:
1
• the machine is connected to a wireless
network
• WLAN Enable is set to On.
a
Press Menú (Menu).
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
5.Auto Power Off.
Press OK.
d
Press a or b to choose 1hour, 2hours,
4hours, 8hours or Off.
Press OK.
e
Press Detener/Salir (Stop/Exit).
General setup
1
1
3