Brother DCP-T700W 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Brother DCP-T700W에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-T700W 25 페이지.
Brother DCP-T700W에 대해서도 마찬가지입니다: 고급 사용자 설명서 (39 페이지), 고급 사용자 설명서 (40 페이지), 고급 사용자 설명서 (46 페이지)

페이지 인쇄

Changing the control

panel (if needed)

Remove the original control panel from the

machine with both hands. Then attach the

control panel of your chosen language.

Connect the power cord

WARNING

The machine must be fitted with an earthed

plug.

NOTE

DO NOT connect the USB cable yet (if you are

using a USB cable).

Connect the power cord.

NOTE

• The Warning LED on the control panel will stay

on until you have filled the ink tanks.

• To prolong the life of the print head, provide the

best ink economy and maintain print quality, we

do not recommend unplugging the machine

frequently and/or leaving the machine

unplugged for extended periods of time. Each

time you plug the machine in, it automatically

cleans the print head, which uses some of your

ink.

We recommend using

machine. Using

the machine, resulting in periodic, but less

frequent, cleaning of the print head.

to power down the

allows minimal power to

Choose your language

When the LCD shows this message, press OK.

Select Language

Press OK Key

Press a or b to choose your language and

press OK.

Press a (Yes) to confirm the language setting.

Fill the ink tanks

CAUTION

If ink gets in your eyes, wash it out with water at

once and call a doctor if you are concerned.

IMPORTANT

DO NOT shake the ink bottles. If ink stains your

skin or clothing, wash with soap or detergent at

once.

NOTE

Make sure you use the Introductory Ink bottles

included with your machine first.

Make sure that the power is turned on.

Open the ink tank cover a.