Brother DCP120C - Flatbed Multifunction Photo Capture Center 빠른 시작 매뉴얼 - 페이지 15
{카테고리_이름} Brother DCP120C - Flatbed Multifunction Photo Capture Center에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 페이지. Quick setup guide - french
Brother DCP120C - Flatbed Multifunction Photo Capture Center에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (24 페이지), 부품 참조 목록 (30 페이지), 빠른 설정 매뉴얼 (33 페이지), (프랑스어) 빠른 설치 가이드 (24 페이지)
페이지 인쇄
Installing the Driver & Software
6
The installation of PaperPort
automatically start and is followed by the
installation of MFL-Pro Suite.
7
When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
8
Choose Standard (DCP-115C, DCP-117C and
DCP-120C) or Local Connection (DCP-
315CN), and then click Next. The installation
continues.
9
When this screen appears, go to the next step.
10
Lift the scanner cover to its open position.
11
®
9.0SE will
12
13
Insert the USB cable to the USB socket marked
with a
symbol. You will find the USB
socket above and to the left of the ink cartridge
slots, as shown below.
Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
®
Windows
13