Brother DCP120C - Flatbed Multifunction Photo Capture Center 빠른 시작 매뉴얼 - 페이지 30
{카테고리_이름} Brother DCP120C - Flatbed Multifunction Photo Capture Center에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 페이지. Quick setup guide - french
Brother DCP120C - Flatbed Multifunction Photo Capture Center에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (24 페이지), 부품 참조 목록 (30 페이지), 빠른 설정 매뉴얼 (33 페이지), (프랑스어) 빠른 설치 가이드 (24 페이지)
페이지 인쇄
For Network Users
This section is for an administrator who wants to configure the machine on a network using the BRAdmin
1
Professional utility. (DCP-315CN only)
Installing the BRAdmin
Professional configuration
utility (Windows
The BRAdmin Professional utility is designed to
manage your Brother network connected devices
such as network-ready Multifunction devices and/or
network-ready printers in a Local Area Network (LAN)
environment.
BRAdmin Professional can also be used to manage
devices from other manufacturers whose products
support SNMP (Simple Network Management
Protocol).
For more information on BRAdmin Professional, visit
us at http://solutions.brother.com.
1
Put the supplied CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically. Follow the on-screen
instructions.
2
Click Install Optional Applications on the
main menu screen.
3
Click BRAdmin Professional and follow the
on-screen instructions.
28
®
only)
Setting your IP address,
Subnet Mask and Gateway
using BRAdmin Professional
®
(Windows
1
Start BRAdmin Professional, and choose TCP/IP.
2
Click Devices, then Search Active Devices.
BRAdmin searches for new devices automatically.
3
Double-click the new device.
4
Enter the IP Address, Subnet Mask and
Gateway, and then click OK.
5
The address information will be saved to the
machine.
Note
You can use the BRAdmin Professional utility to
set a password. (See the Network User's Guide on
the CD-ROM.)
only)