Brother DCP120C - Flatbed Multifunction Photo Capture Center 빠른 설정 매뉴얼 - 페이지 7
{카테고리_이름} Brother DCP120C - Flatbed Multifunction Photo Capture Center에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP120C - Flatbed Multifunction Photo Capture Center 24 페이지. Quick setup guide - french
Brother DCP120C - Flatbed Multifunction Photo Capture Center에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (33 페이지), 부품 참조 목록 (30 페이지), 빠른 설정 매뉴얼 (33 페이지), (프랑스어) 빠른 설치 가이드 (24 페이지)
페이지 인쇄
4
Fan the stack of paper well to avoid paper jams
and misfeeds.
5
Gently put the paper into the paper tray print
side down and top edge first.
Check that the paper is flat in the tray and
below the maximum paper mark (1).
Note
• Make sure the paper side guides touch the sides
of the paper.
• Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause
paper feed problems.
6
Put the output paper tray back on and push the
paper tray firmly back into the machine.
3
Installing the power cord
1
Connect the power cord.
1
Improper Setup
DO NOT connect the USB cable yet.
Note
The control panel warning LED will stay on until
you have installed the ink cartridges.
Setting Up the Machine
5