Brother GTX pro Bulk 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Brother GTX pro Bulk에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX pro Bulk 20 페이지. Garment printer
Brother GTX pro Bulk에 대해서도 마찬가지입니다: 설정 매뉴얼 (44 페이지)

페이지 인쇄

Only a few nozzles missing:

Perform a Powerful Cleaning

> Perform a new Nozzle Check after Head Cleaning to check the result and redo the cleaning up to 3 times.

Ensure all other maintenance has been performed such as cleaning the cap and wiper blade and see that the

wiper cassette is fresh and still has moisture. If there is no improvement by the 4th time, please contact support.

Head Cleaning

> If this does not resolve the matter, please visit

To achieve successful weekly maintenance you will have to do the following actions:

• Suction Cap Cleaning

• Exhaust Cap Cleaning

• Wiper Cleaning

• Nozzle Guard Cleaning

• Visual Inspection

> Always use this menu to perform cleanings or replace parts:

Maintenance

fig. 1

DEFLECTION & FLASH FIRING

Deflection appears as odd bunched up or

gapped lines where the horizontal bars will

appear blurred and staggered. When this is

present you will want to perform 2-3 Flash

Fire Cleanings.

After performing a Flash Fire Cleaning 2-3

times, perform another Nozzle Check to test

the results.

Flash Cleaning

BrotherDTG.com/Support

WEEKLY MAINTENANCE

Maintenance Part Clean/Replace

fig. 2

More than 10 nozzles missing:

Perform a Super Cleaning

select Print

Heads

to contact Brother Support.

WARNING

You will have 15 minutes to complete

any pending items for the maintenance

process. Prepare to complete all items

within the allotted time.