Brother GTX Series 참조 매뉴얼 - 페이지 7

{카테고리_이름} Brother GTX Series에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX Series 13 페이지.
Brother GTX Series에 대해서도 마찬가지입니다: 참조 매뉴얼 (13 페이지)

> WEEKLY MAINTENANCE PROCEDURES

To achieve a good weekly maintenance you will have to do the following actions:

days

+ Suction Cap Cleaning

+ Wiper Cleaning

> Always use this menu to perform cleanings or replace parts :

Maintenance

Suction Cap & Exhaust Cleaning

The black silicon lips of the two cappings should be cleaned with the Cleaning Stick R

dipped in Cleaning Solution.

It is necessary to remove the built-up of the remaining ink staying on the edges of the

cappings. It will prevent air leakage and keep the good suction of the pumps!

Be careful not to touch the foam! Keep it flat!

The four extrusion lances (see in the blue circle...) and the hole

sitting on the side of the capping at the Exhaust position need

also to be cleaned and free of dried ink.

Always clean first the hole at the front and go backward while

cleaning the lances !

Suction Cap Cleaning

W E E K L Y

Maintenance Part Clean/Replace

Exhaust Cleaning

WEEKLY MAINTENANCE

M A I N T E N A N C E

+ Exhaust Cleaning

+ Nozzle Guards Cleaning

and follow instructions on the display

TO BE DONE EVERY WEEK

Direction to clean