Brother GTX-4 설정 매뉴얼 - 페이지 16

{카테고리_이름} Brother GTX-4에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX-4 37 페이지. Garment printer
Brother GTX-4에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지)

Setup of the printer

Mount the following supplied accessories inside the printer.

②

Open the cover to the direction a and shift the carriage to

direction s. Put on the gloves that came with the printer and

perform the following work.

Flushing receiver

Direct its orientation with the hole on the bottom to the front and

push it in until it clicks (there is no difference in white and color

sides; they can be mounted on either side).

①

X0006

X0287

Make sure that no flushing foam extends off the

outboard end portions of the flushing receiver. If

it does, it may interfere with the nozzle surface

IMPORTANT

of the head and may result in a problem

concerning firing of the print heads.

Carriage fixing pin

The carriage fixing pin will be needed when the

power is turned OFF due to power outage while

the printer is running and the recovery is not

expected for a while.

Secure the pin in the place illustrated above so

TIPS

as not to lose it.

The front cover will not close completely if the

carriage is fixed with the carriage fixing pin.

X0187