Brother GTX-4 설정 매뉴얼 - 페이지 21

{카테고리_이름} Brother GTX-4에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX-4 37 페이지. Garment printer
Brother GTX-4에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지)

Filling the cleaning solution

FULL

LOW

Pull out the cleaning liquid tank from the side of the printer;

enough to open the lid of the tank and fill the tank with the

cleaning solution until reaching the "FULL" line.

When filling is completed, close the lid and slowly push the

cleaning liquid tank back inside the printer for storage.

When you pour the cleaning solution, be sure

not to exceed the "FULL" line.

IMPORTANT

After filling the cleaning solution, make sure to

push the cleaning liquid tank in to the end. The

cleaning liquid tank that is not properly inserted

TIPS

causes an error and disables printing.

Ink cartridge setup and installation

Install the ink pouches into cartridges by referring to the

illustrations on the label located on the ink bay cover of the

machine.

If you are not using white ink and using only

color inks for printing, install a maintenance

solution pouch instead of a white ink pouch,

TIPS

referring to the procedures from step 2.

Since there is a component within the white ink which becomes

deposited, please be sure to shake the ink pouch before it is

taken out of the box.

X0025

Hold each edge of the carton containing the pouch tightly and

shake it 100 times from side to side.

Next, turn it upside down and shake it 100 times.

X0016