Brother GTX600NB 설정 매뉴얼 - 페이지 30
{카테고리_이름} Brother GTX600NB에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX600NB 45 페이지. Garment pra inter
Brother GTX600NB에 대해서도 마찬가지입니다: 안전 매뉴얼 (2 페이지)
페이지 인쇄Setup of the printer
7
Refilling the ink and cleaning solution
Turn ON the power of the printer and perform the operation
while the printer is in Standby mode.
If there is new firmware, update the printer.
CAUTION
Be sure to wear a pair of plastic gloves and protective
glasses while refilling the ink.
Agitate the white ink before refilling.
IMPORTANT
For details, refer to the Instruction Manual.
When agitating the white ink, remove the IC
stick from the refill ink bottle to prevent the IC
TIPS
stick from falling off.
1)
-> [Ink refill] -> Select the ink color and cleaning
solution you want to refill ->
2) Insert the IC stick of the same color as the ink to refill ->
An error appears if you insert an IC stick of a
different color.
TIPS
21
3) Refill the ink and cleaning solution.
When refilling, exercise care not to fill past the
graduation line above 6. Refill white ink and
IMPORTANT
cleaning solution past the graduation line under
6, and color ink past the graduation line under 4.
4) Follow the instructions on the screen.
Be sure to close the tank lids once you have
refilled the ink and cleaning solution.
To store the ink valve after use, wipe off the ink
IMPORTANT
with a waste cloth and seal it in a plastic bag. Do
not use a non-standard funnel. Use the provided
valve. Otherwise, ink may be contaminated or
deteriorated, possibly damaging the printer.