Brother HL 1850 - B/W Laser Printer 드라이버 설치 매뉴얼

{카테고리_이름} Brother HL 1850 - B/W Laser Printer에 대한 드라이버 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL 1850 - B/W Laser Printer 2 페이지. Parts list
Brother HL 1850 - B/W Laser Printer에 대해서도 마찬가지입니다: 드라이버 설치 매뉴얼 (2 페이지), 부품 목록 (27 페이지)

페이지 인쇄

Brother HL 1850 - B/W Laser Printer 드라이버 설치 매뉴얼

Laser Printer HL-1850 and HL-1870N

Driver Installation Guide

Windows

For non-Network Users

Follow the instructions in this guide for your interface cable.

Some illustrations are based on the HL-1870N.

Steps 1 to 4 Follow these steps in the Quick Setup Guide first.

USB

For

Interface Cable Users Only

Step 5 Install the Driver & Connect the Printer to Your PC

Note: When the "Add New Hardware Wizard" appears on

your PC, click the Cancel button.

Note: Make sure the USB interface cable is NOT connected

to the printer, and then begin installing the driver. If you have

already connected the cable, remove it.

Select the USB interface cable.

OFF ON

When this screen appears, make sure the printer power switch is on.

Connect the USB interface cable to your PC, and then connect it to the printer.

Click the Next button.

Note: Setting Your Printer as the Default Printer

Click Start, Setting and Printers.

Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark

of UNIX Systems Laboratories. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc.

All other brand and product names are trademarks or registereted trademarks of their respective holders.

Click "Connect the interface cable &

Install the driver/utility."

Click the Install button.

Follow the instructions on the

screen.

Click the Finish button.

The setup is now complete.

1 Please follow the steps below when the printer is not set as the default printer.

(For Windows

2000/XP Users Only)

Select the Brother HL-1850 or HL-1870N

From the File menu, select

icon.

Set as Default printer.

Parallel

For

Step 5 Connect the Printer to Your PC & Install the Printer Driver

Click "Connect the interface cable & Install the

driver/utility."

LJ5996001 Printed in China

Connect the parallel interface cable to your PC, and

then connect it to the printer.

Click the Install button.

Control Panel

Data

Back

Reprint

Set

Job cancel

For more information, see "CONTROL

PANEL" in Chapter 3 of the User's Guide on

the supplied CD-ROM.

Interface Cable Users Only

Select the Parallel interface cable.

OFF ON

Turn on the printer power switch.

Follow the instructions on the screen.

Data LED : Orange

Data remains in the printer buffer.

Blinking

Receiving or processing data.

Off

No remaining data.

Buttons

Exit from the control panel menu, Reprint settings or clear error messages.

Pause / Continue printing.

Job Cancel

Stop and cancel the printer operation in progress.

Reprint

Select the Reprint menu.

Move forward through menus.

Move backward through menus.

Set

Select the control panel menu.

Set the selected menus and settings.

Back

Go back one level in the menu structure.

Language Setting (Default is English)

1. Select the SETUP mode by pressing the

button, and then press the Set button.

2. Check that the LANGUAGE message appears, and then press the Set button.

3. Choose your language by pressing the

button, and then press the Set button. An asterisk mark (

appears at the end of the display.

(You can return to the READY status by pressing the Go button.)

Note

Please enhance the RAMDISK size when you want to use the Reprint functions without the optional HDD

or CompactFlash.

See "RAM expansion" in Chapter 4 of the User's Guide on the supplied CD-ROM.

OFF ON

Turn off the printer power switch.

Note: If the "Add New Hardware

Wizard" appears on your PC, click the

Cancel button.

Click the Finish button.

The setup is now complete.

)