Brother HL 2040 빠른 설정 매뉴얼 - 페이지 27

{카테고리_이름} Brother HL 2040에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL 2040 30 페이지. Personal
Brother HL 2040에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 빠른 설정 매뉴얼 (18 페이지), 빠른 설정 매뉴얼 (30 페이지), 데이터시트 (4 페이지), 서비스 매뉴얼 (12 페이지)

페이지 인쇄

Web browser

The Brother print server is equipped with a web server that allows you to monitor its status or

change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).

The User Name is 'admin' and the default Password is 'access'. You can use the web browser to

change this password.

Network User's Guide Chapter 2.

Network Factory Default Setting

If you wish to reset the print server back to its default factory settings (including password),

please follow these steps:

Turn off the printer.

Make sure that the front cover is closed and the power cord is plugged in.

Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until

the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner,

Drum and Paper LEDs are off.

Press the Go button six times. Make sure that all the LEDs light up when the print server has been

reset to its default factory settings.

Print the Printer Settings Page

The Printer Settings Page lists all the current printer settings, including network settings. To

print the Printer Settings Page, press the Go button three times.