AEG C67600K 설치 및 운영 지침 매뉴얼 - 페이지 23

{카테고리_이름} AEG C67600K에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG C67600K 44 페이지. Ceramic glass induction hob
AEG C67600K에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (46 페이지), 설치 및 운영 지침 매뉴얼 (47 페이지)

페이지 인쇄

Cooking without the Automatic Heating-Up Function

1. For heating up/browning, select a high power.

2. As soon as steam forms or the fat is hot, switch back to the required

heat setting for the remainder of the cooking time.

3. Reset to zero in order to end cooking.

Note:

When cooking with the induction cooking zone you should take into

account that

– the heating-up times are reduced by the direct energy transfer to the

pan!

– the cooking process stops immediately after the cooking zone is

switched off (no boiling over!)

Residual Heat Indicator

When an individual cooking zone or the entire hob is

switched off, any residual heat is shown with an h (for

"Hot") in the digital display for the appropriate cooking

zones.

Even after the cooking zone has been switched off, the

residual heat indicator only goes out when the cooking zone is cold.

You can use the residual heat for melting and keeping food warm.

Important! As long as the residual heat indicator is illuminated, there

is a risk of burns.

Important! If the power supply is interrupted the h symbol will also

go out and information about residual heat will no longer be available.

However, it is still possible to burn yourself. This can be avoided by be-

ing particularly attentive.