Brother HL-1000 Series 빠른 설정 매뉴얼 - 페이지 23

{카테고리_이름} Brother HL-1000 Series에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-1000 Series 42 페이지. Brother hl-1040: quick setup

LAMPS AND SWITCH

This section refers to the following lamps and switch on the printer control panel.

Note

When the power switch is off or the printer is in sleep mode, all lamps including the Ready

lamp are off.

Ready (Paper) Lamp

The Ready lamp indicates the current status of the printer.

Lamp

Printer status

The power switch is off or the printer is in sleep mode. If the printer is

Off

in sleep mode, it will wake up automatically when it receives data or

you press the control panel switch.

The printer is warming up. (Blinking at 1 second intervals)

Blinking

The printer is cooling down and has stopped printing until the printers

Blinking

internal temperature lowers. (Blinking at 2 seconds intervals)

The printer is ready to print.

This lamp also works as the Paper lamp with the Alarm lamp. They blink

simultaneously to indicate a paper error.

Data (Toner) Lamp

The Data lamp indicates the current status of the print data process.

Lamp

Printer status

The printer has no print data.

Off

The printer is receiving data from the computer or the printer is

Blinking

processing data in memory.

Print data remains in the printer memory. If the Data lamp is on for a

long period of time and nothing has printed, you need to press the

switch to print the remaining data.

This lamp also works as the Toner lamp with the Alarm lamp. They blink

simultaneously to indicate a toner error.

CARTRIDGE"

and

"Operator Calls" section in this manual.

See "Operator Calls" section of this manual.

See "REPLACING THE TONER

-21 -