Brother HL-1040 빠른 설정 매뉴얼 - 페이지 20
{카테고리_이름} Brother HL-1040에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-1040 42 페이지. Brother hl-1040: quick setup
Brother HL-1040에 대해서도 마찬가지입니다: 부품 참조 목록 (16 페이지)
페이지 인쇄Using the Remote Printer Console Main Program
Type C:\RPCX>RPCX and press the
Enter key to start the Remote Printer
Console main program.
The Main Screen will appear on your
computer screen as shown on the right.
The RPC gets the current settings information from your printer when it starts if bi-directional
communication is enabled between your computer and printer. Otherwise, RPC shows its
default settings. If you want to change settings, move the cursor to the desired item and select
the desired setting by using the Enter and cursor keys. Then, press the Enter key to make
the selected setting valid. If you use a mouse, click the desired item to change the setting.
Additionally, there are four sub-menus as shown in the table below. Select a sub-menu by
clicking the desired sub-menu with the mouse, by using the cursor key and the Enter key,
or by using the keys shown below to switch the screen to the sub menus.
Menu
Press the keys Functions
Direct Access
Alt + D
Printer Setup
Alt + P
Console Config Alt + C
Guide
Alt + G
Help
F1
Direct_Access
[Alt+Character] Menu
You can directly control printer functions such as Print
Form, Self Print, Reset Printer, Sleep Control.
You can enter the setting mode to change further printer
settings, such as, margin settings, continue mode,
reprint function, font, and sleep mode.
You can change the environment settings for the RPC
program: color, Status Monitor configuration, etc.
You can get into the Guide mode.
You can get On-Line help about the current highlighted
item by pressing F1.
- 18 -
Remote Printer Console
Printer_Setup
Console_Config
Current Status
Status
Ready
Media Type
Regular
Emulation
Auto
Paper Size
Letter
Orientation
Portrait
Quality
Normal
Copies
1
Memory Size
1048576 Bytes
[Enter]Setting
[
/
] Select
[Esc] Exit
[F1] Help
Guide