Brother HL-1040 빠른 설정 매뉴얼 - 페이지 23
{카테고리_이름} Brother HL-1040에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-1040 42 페이지. Brother hl-1040: quick setup
Brother HL-1040에 대해서도 마찬가지입니다: 부품 참조 목록 (16 페이지)
페이지 인쇄LAMPS AND SWITCH
This section refers to the following lamps and switch on the printer control panel.
Note
When the power switch is off or the printer is in sleep mode, all lamps including the Ready
lamp are off.
Ready (Paper) Lamp
The Ready lamp indicates the current status of the printer.
Lamp
Printer status
The power switch is off or the printer is in sleep mode. If the printer is
Off
in sleep mode, it will wake up automatically when it receives data or
you press the control panel switch.
The printer is warming up. (Blinking at 1 second intervals)
Blinking
The printer is cooling down and has stopped printing until the printers
Blinking
internal temperature lowers. (Blinking at 2 seconds intervals)
The printer is ready to print.
On
This lamp also works as the Paper lamp with the Alarm lamp. They blink
simultaneously to indicate a paper error.
Data (Toner) Lamp
The Data lamp indicates the current status of the print data process.
Lamp
Printer status
The printer has no print data.
Off
The printer is receiving data from the computer or the printer is
Blinking
processing data in memory.
Print data remains in the printer memory. If the Data lamp is on for a
On
long period of time and nothing has printed, you need to press the
switch to print the remaining data.
This lamp also works as the Toner lamp with the Alarm lamp. They blink
simultaneously to indicate a toner error.
CARTRIDGE"
and
"Operator Calls" section in this manual.
See "Operator Calls" section of this manual.
See "REPLACING THE TONER
-21 -