AEG C88900K 설치 및 운영 지침 매뉴얼 - 페이지 24

{카테고리_이름} AEG C88900K에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG C88900K 39 페이지. Ceramic glass induction hob

Operating Instructions

For more rapid adjustment, leave your finger on the sensor field + or

- until the required value is reached.

If the sensor field - is activated first, the time setting starts at

99 minutes. If the sensor field + is activated first, the time setting

starts at 1 minute.

Displaying the Remaining Cooking Time

If you select a cooking zone which is in Timer mode, the cooking time

still remaining appears in the Timer display field.

Use the Timer as a Short Time Measurer ("Minute

Minder")

The Timer function can also be used as a short time measurer without

the automatic switch-off function, provided that the timer is not

already being used for 1 or more cooking zones. No cooking zone may

be selected in this case. The sensor field cooking zone with the decimal

point in the display must therefore be touched again so that the deci-

mal point goes out.

Set the time as described above.

Ending the Timer Function Prematurely

There are two ways of switching off the timer early:

Switching off the cooking zone and timer simultaneously

1. Select the desired cooking zone using the cooking zone buttons.

2. Touch the + and - buttons simultaneously: cooking zone and timer

switch off.

Switching off the timer - leaving the cooking zone active

1. Select the desired cooking zone using the cooking zone buttons.

2. Touch the "Timer" button again.

3. Touch the + and - buttons simultaneously:

– only the timer switches off.

– The cooking zone is left on.