Brother HL-1112 지침 - 페이지 2

{카테고리_이름} Brother HL-1112에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-1112 4 페이지.
Brother HL-1112에 대해서도 마찬가지입니다: 제품 안전 매뉴얼 (25 페이지), 빠른 설정 매뉴얼 (2 페이지), 사용 설명서 (7 페이지)

페이지 인쇄

Filling the Toner Cartridge Brother TN-1050, HL-1110, HL-1112:

Take the bottle of refill toner and shake it lightly. Remove the cap from the bottle and screw in a

funnel. Carefully pour the toner into the toner cartridge (Figure 3). When you have filled the

cartridge, you can replace the previously removed plug. After filling, you only need to insert the

reset lever or reset it to "full".

Brother HL-1110, HL-1112 - Refilling Toner Brother TN-1050, HL-1110, HL-1112 refill

Reset Lever to Brother TN-1050, HL-1110, HL-1112:

The reset lever is a mechanical device that counts down the toner level every time you print. You

need to insert the reset lever and

used when buying a printer). Replenished toner cartridges already have the reset lever and the new

cover and only need to be reset in this case.

Loosen the two screws on the side cover (Figure 4). The side cover is now only attached with two

barbs. Loosen the two barbs (Figure 5 and 6) and remove the side cover. When you remove the

upper, right-hand gear (Figure 7), you can insert or reverse the reset lever (Figure 8). Make sure the

small plastic arm is pointing to the left. After inserting the reset lever, you can replace the previously

removed gear and replace the side cover

Brother TN-1050, HL-1110, HL-1112 nachfüllen

a new side cover if you want to refill a starter cartridge

Brother TN-1050, HL-1110, HL-1112 Remove 2 Screws

Brother TN-1050, HL-1110, HL-1112 Remove Barbs

(to be