Brother HL-1118 사용 설명서 - 페이지 4

{카테고리_이름} Brother HL-1118에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-1118 7 페이지.
Brother HL-1118에 대해서도 마찬가지입니다: 제품 안전 매뉴얼 (19 페이지), 빠른 설정 매뉴얼 (2 페이지), 제품 안전 매뉴얼 (19 페이지)

페이지 인쇄

Carefully lower the

cartridge and bottle to

this angle and allow the

toner to settle into the

cartridge

Replace the cap in your toner cartridge with the new

cap. Make sure the cap is fitted securely so that no

toner can escape.

INSTRUCTIONS FOR RESETTING THE CARTRIDGE

You have 2 options. You can either use the toner continue mode (see page 1) - or you can reset it using a

reset gear. We think the first option is the best but have provided the details for the gear reset below

Brother has introduced a small plastic gear in its cartridges that tells the printer a new cartridge is installed.

You will need to reset the plastic gear into the correct position or the cartridge will be rejected by the printer.

Follow instructions below.

Starter cartridges – (simply marked TN & come free with the

printer)

Please note that the starter cartridges (comes with a new printers) do not have the reset gear included. You

will need to purchase a reset gear.

Remove the 2 screws as shown opposite.

(if you have the orange cover fitted you will need to

remove this)

Repeat stages A B C with 30 second breaks at point

C (if necessary) to allow the toner to settle into the

cartridge.

Please read instructions from start to finish

before you start your refill.