LG VX4650 빠른 매뉴얼 - 페이지 4

{카테고리_이름} LG VX4650에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. LG VX4650 5 페이지. Voice command phone
LG VX4650에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)

페이지 인쇄
LG VX4650 빠른 매뉴얼
Manually Programming the VX4650
1.
Press "menu" + 0 and press "000000"
2.
Press "1" key for Service Programming
3.
Press "ok" (Read only)
4.
Input the "Phone number (MDN)" and press "ok"
5.
Input the "Phone number (MIN)" and press "ok"
6.
Input the "NAM1 Home SID" and press "ok"
7.
Input the "NAM1 Name" and press "ok"
8.
Confirmation "Basic NAM1 is completed" when programmed
successfully
9.
Press Left Soft Key for "Exit". Powering Down will proceed
OTA Instructions
1.
Perform the usual billing system activation procedure
2.
Power up the phone and enter the Star Code, *228 + [send], on the
handset
3.
The following audio message will be heard:
"Welcome to Verizon Wireless' Over the Air programming. This
call is airtime free. Press '1' to program your phone. Press '2' to
update your roaming capabilities."
Note: Programming will take up to 2 minutes. Should the
programming exceed 45 seconds, the following audio message
will be repeated at 25-second internals: "Please continue to hold.
Your phone is being programmed."
You will hear an audio message once the phone has been
successfully programmed
How to Access the Web
1.
Press left on the Navigation Key to access the web browser.
2.
Once the web browser is launched, you will see the Home Page.
You can end a browser session by pressing END at any time.
3.

Helpful Hints

IP Address Programming
1.
2.
3.
4.
5.
6.
7.
8.
9.
How to Send a Text Message
1.
2.
3.
How to View the Software, PRL, ERI and Browser Version:
1.
2.
Press "menu" + 0 and enter service code "000000"
Press 9 for "WAP Setting"
6 Items will be displayed on the LCD screen
Press 1 for "Proxy Address Setting"
Press 2 for "Proxy Port Setting"
Press 3 for "User Password"
Press 4 for "Homepage"
Press 5 for "Clear Perm Mem"
Press 6 for "Reset Browser"
Press down on the Navigation Key and select New Message (2)
Press Left Soft Key for Contacts to enter a recipient from the
Contacts (1), Recent Calls (2), or Recent Addresses (3)
menu or use the key pad to enter a new e-mail address or phone
number and press OK. Up to 10 recipients can be added.
Scroll down and enter the message (up to 160 characters) using
the keypad and press Left Soft Key for Send.
From the Settings (9) menu, select Phone Info (8)
Select S/W Version (2)