LG - 사용자 설명서 - 페이지 2

{카테고리_이름} LG -에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. LG - 15 페이지. Led
LG -에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지), 소유자 매뉴얼 (22 페이지), 소유자 매뉴얼 (24 페이지), 소유자 매뉴얼 (21 페이지), 사용자 설명서 (39 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (24 페이지), 소유자 매뉴얼 (18 페이지), 소유자 매뉴얼 (16 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (19 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (19 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (16 페이지), 소유자 매뉴얼 (21 페이지), 서비스 매뉴얼 (29 페이지), 소유자 매뉴얼 (32 페이지), 설정 매뉴얼 (37 페이지)

LG - 사용자 설명서

Important Precautions

On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
A2