LG 19MB35PB 소유자 매뉴얼 - 페이지 8

{카테고리_이름} LG 19MB35PB에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. LG 19MB35PB 29 페이지.
LG 19MB35PB에 대해서도 마찬가지입니다: 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (28 페이지)

ASSEMBLING AND PREPARING

Adjusting the stand height

Place the monitor mounted on the stand base

in an upright position.

Remove the tape attached at the bottom rear

of the stand body, then pull out the locking

pin.

Stand Body

The height can be adjusted up to 110 mm(4.33

inches).

CAUTION

Once the pin is removed, it is not necessary

to re-insert it to adjust the height.

WARNING

Do not put your finger be-

tween the screen and the

base (chassis) when adjust-

ing the screen's height.

Tape

Locking Pin

110 mm(4.33 inches)

Using the Kensington locking

device

The connector for the Kensington lock is located

on the rear of the monitor.

For more information on installation and usage,

refer to the Kensington lock user manual or visit

the website at http://www.kensington.com.

Connect the monitor to the table with the Kensing-

ton lock cable.

NOTE

Using the Kensington lock is optional. The

accessories can be purchased at your local

electronics store.