LG 20M37A 소유자 매뉴얼 - 페이지 16

{카테고리_이름} LG 20M37A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. LG 20M37A 43 페이지. Ips led monitor
LG 20M37A에 대해서도 마찬가지입니다: 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (43 페이지), 소유자 매뉴얼 (43 페이지), 소유자 매뉴얼 (44 페이지), 소유자 매뉴얼 (43 페이지), 소유자 매뉴얼 (43 페이지), 소유자 매뉴얼 (43 페이지)

페이지 인쇄
LG 20M37A 소유자 매뉴얼
16

CUSTOMIZING SETTINGS

CUSTOMIZING SETTINGS
1
Press the desired button on the bottom of the Monitor set.
2
Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow (
3
Select EXIT to leave the OSD menu.
MENU
Button
(Power Button)
READER
FUNC.
AUTO
Accesses the main menus.(See p.17)
OSD Locked/OSD
This function allow you to lock the current control settings, so that
Unlocked
they cannot be inadvertently changed.
Press and hold the MENU button for several seconds. Then OSD
of "OSD Lock" will appear. After that, user can select lock or unlock
by pressing left/right button.
If user selects the "Lock" icon by pressing the "OK" button, the
message "OSD Locked" will appear. Otherwise, "OSD Unlocked"
will appear. After selecting the "Lock", If you want to change to
Unlock, you can push the "MENU" button for several seconds. The
message "OSD Unlocked" will appear.
Use this button to enter Reader Mode menu. Its function works to display screen as
paper-like picture for Eye comfort.If you want to more information(See p.23).
Use this button to enter SMART ENERGY SAVING , Picture Mode,Color Wizard, DUAL
DISPLAY, DUAL WEB menus.(See p.24~27)
When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only supported in Analog Mode)
The best display
19M37A/19M37D/19M37H: 1366 x 768
mode
20M37A/20M37D/20M37H/20MP37A: 1600 x 900
22M37A/22M37D/22MC37D/22M37H/22M37HQ/24M37A/24M37D/
24MC37D/24M37H/24M37HQ/27M37D/27MP37HQ/27MP37VQ/27
MC37HQ /27MP36HQ: 1920 x 1080
You can choose the input signal.
• When two input signals are connected, you can select the input signal (D-SUB/DVI-D/
HDMI) you want.
• When only one signal is connected, it is automatically detected. The default setting is
D-SUB.
EXIT
EXIT the OSD(On Screen Display).
Turns the power on or off.
Power Indicator
The power indicator stays white if the display is running properly (On
Mode). If the display is in Sleep Mode, the power indicator blinks
white.
) button.
INPUT
EXIT
Monitor set Buttons
Description