LG 22BK4 series 소유자 매뉴얼 - 페이지 13

{카테고리_이름} LG 22BK4 series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. LG 22BK4 series 29 페이지. Led lcd monitor
LG 22BK4 series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (27 페이지), 소유자 매뉴얼 (30 페이지), 소유자 매뉴얼 (32 페이지)

페이지 인쇄
LG 22BK4 series 소유자 매뉴얼

Mounting on a wall

For proper ventilation, allow a clearance of 100
mm(3.94 inches) on each side and from the wall.
Detailed instructions are available from your dealer, see
the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
If you intend to mount the Monitor set to a wall, attach
Wall mounting interface (optional parts) to the back of
the set.
When you install the Monitor set using a wall mounting
interface (optional parts), attach it carefully so it will not
drop.
1
If you use screw longer than standard, the monitor
might be damaged internally.
2
If you use improper screw, the product might be dam-
aged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Model
22MK4 series 24MK4 series
22BK4 series 24BK4 series
Wall Mount (A x B)
75 x 75
Standard screw
M4
Number of screws
4
Model
27MK4 series 27BK4 series
Wall Mount (A x B)
100 x 100
Standard screw
M4
Number of screws
4
100 mm
(3.94 inches)
100 mm
(3.94 inches)
Wall Mount (A x B)
y
CAUTION
Disconnect the power cord first, and then
y
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
y
slanted wall, it may fall and result in severe
injury.
Use only an authorized LG wall mount
y
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y
cause damage to the Monitor set and void
your warranty.
Use only screws and wall mounts that
y
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
Screw length from outer surface of back
y
cover should be under 8mm.
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit will include an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Be sure to use the proper
length.
For more information, refer to the
y
instructions supplied with the wall mount.
13
Back Cover
Max.8mm