LG 22MB35P 소유자 매뉴얼 - 페이지 13

{카테고리_이름} LG 22MB35P에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. LG 22MB35P 29 페이지. Ips led monitor
LG 22MB35P에 대해서도 마찬가지입니다: 소유자 매뉴얼 (30 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (29 페이지), 소유자 매뉴얼 (30 페이지), 소유자 매뉴얼 (28 페이지)

페이지 인쇄
LG 22MB35P 소유자 매뉴얼

CUSTOMIZING SETTINGS

1
Press the desired button on the bottom of the Monitor set.
2
Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow (
3
Select EXIT to leave the OSD menu.
Button
(Power Button)
Accesses the main menus.(See p.14)
OSD Locked/OSD
This function allow you to lock the current control settings, so
Unlocked
that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds. Then
OSD of "OSD Lock" will appear. After that, user can select
lock or unlock by pressing left/right button.
If user selects the "Lock" icon by pressing the "OK" button,
the message "OSD Locked" will appear. Otherwise, "OSD
Unlocked" will appear. After selecting the "Lock", If you want
to change to Unlock, you can push the "MENU" button for
several seconds. The message "OSD Unlocked" will appear.
Use this button to enter Reader Mode menu. Its function works to display screen as
paper-like picture for Eye comfort.If you want to more information.(See p.19)
Use this button to enter SMART ENERGY SAVING menu.(See
When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only supported in Analog Mode)
The best display mode 19MB35P:1280 x 1024
22MB35P/23MB35P/24MB35P:1920 x 1080
You can choose the input signal.
• When two input signals are connected, you can select the input signal (D-SUB/DVI)
you want.
• When only one signal is connected, it is automatically detected. The default setting is
D-SUB.
EXIT
Exit the OSD(On Screen Display).
Turns the power on or off.
Power Indicator
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode, the power
indicator blinks white.
CUSTOMIZING SETTINGS
) button.
Monitor set Buttons
Description
p.20)
13