AEG IKE42640KB 사용자 설명서 - 페이지 35
{카테고리_이름} AEG IKE42640KB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG IKE42640KB 40 페이지.
AEG IKE42640KB에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
Problem
You cannot select the maxi‐
mum heat setting for one of
the cooking zones.
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
The hob deactivates.
Residual heat indicator does
not come on.
The sensor fields become
hot.
There is no sound when you
touch the panel sensor
fields.
comes on.
The control bar blinks.
Possible cause
There is water or fat stains
on the control panel.
The other zones consume
the maximum available pow‐
er.
Your hob works properly.
You put something on one or
more sensor fields.
You put something on the
sensor field
.
The zone is not hot because
it operated only for a short
time or the sensor is dam‐
aged.
The cookware is too large or
you put it too near to the
controls.
The sounds are deactivated. Activate the sounds. Refer to
Child Safety Device or Lock
operates.
There is no cookware on the
zone or the zone is not fully
covered.
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
ENGLISH
Remedy
Clean the control panel.
Reduce the heat setting of
the other cooking zones con‐
nected to the same phase.
Refer to "Power manage‐
ment".
Remove the object from the
sensor fields.
Remove the object from the
sensor field.
If the zone operated suffi‐
ciently long to be hot, speak
to an Authorised Service
Centre.
Put large cookware on the
rear zones, if possible.
"Daily use".
Refer to "Daily use".
Put cookware on the zone
so that it fully covers the
cooking zone.
Use suitable cookware. Re‐
fer to "Hints and tips".
Use cookware with correct
dimensions. Refer to "Tech‐
nical data".
35