AEG IPE64551FB 사용자 설명서 - 페이지 19

{카테고리_이름} AEG IPE64551FB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG IPE64551FB 25 페이지.
AEG IPE64551FB에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (24 페이지)

페이지 인쇄

www.aeg.com

Problem

The sensor fields become

hot.

There is no sound when you

touch the panel sensor

fields.

comes on.

The control bar blinks.

and a number come on.

You can hear a constant

beep noise.

9.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Make sure,

you operated the hob correctly. If not the

10. TECHNICAL DATA

10.1 Rating plate

Model IPE64551FB

Possible cause

The cookware is too large or

you put it too near to the

controls.

The sounds are deactivated.

Child Safety Device or Lock

operates.

There is no cookware on the

zone or the zone is not fully

covered.

The cookware is unsuitable.

The diameter of the bottom

of the cookware is too small

for the zone.

There is an error in the hob.

The electrical connection is

incorrect.

servicing by a service technician or

dealer will not be free of charge, also

during the warranty period. The

instructions about the Service Centre and

conditions of guarantee are in the

guarantee booklet.

PNC 949 597 482 00

Remedy

Put large cookware on the

rear zones, if possible.

Activate the sounds. Refer to

"Daily use".

Refer to "Daily use".

Put cookware on the zone so

that it fully covers the cook-

ing zone.

Use suitable cookware. Refer

to "Hints and tips".

Use cookware with correct

dimensions. Refer to "Tech-

nical data".

Deactivate the hob and acti-

vate it again after 30 sec-

onds. If

comes on again,

disconnect the hob from the

electrical supply. After 30

seconds, connect the hob

again. If the problem contin-

ues, speak to an Authorised

Service Centre.

Disconnect the hob from the

electrical supply. Ask a quali-

fied electrician to check the

installation.