Fujitsu UTY-XCSX 설치 매뉴얼

{카테고리_이름} Fujitsu UTY-XCSX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu UTY-XCSX 4 페이지. Optional parts, external input and output pcb

페이지 인쇄

AIR CONDITIONER

OPTIONAL PARTS

External input and output PCB

INSTALLATION MANUAL

For authorized service personnel only.

• Hand this manual to the customer to keep for future use,

such as for relocating or repairing the product.

1. SAFETY PRECAUTIONS

Indicates a potentially or imminently

WARNING

hazardous situation which, if not avoided,

could result in death or serious injury.

For the air conditioner to operate satisfactorily, install as

outlined in this installation manual.

Installation work must be performed in accordance with

national wiring standards by authorized personnel only.

Before installation, be sure that all sources of power have

been shut off. There is a danger of electric shock.

Never touch electrical components immediately after the

power supply has been turned off. Electrical shock may

occur. After turning off the power, always wait 5 minutes or

more before touching electrical components.

For installation purposes, be sure to use the parts supplied

by the manufacturer or other prescribed parts. The use of

non-prescribed parts can cause serious accidents such as

the unit falling, water leakage, electric shock, or ﬁ re

Discharge static electricity before the installation.

For the PCB and locally purchased parts, apply voltage

indicated on speciﬁ cations of parts. Application of

unspeciﬁ ed voltage may result in failure or malfunction of

air conditioner.

Indicates a potentially hazardous

CAUTION

situation that may result in minor or

moderate injury or damage to property.

Do not pull on the connectors with too much force.

2. ABOUT THE UNIT

2.1. General

• This PCB is an adapter connecting indoor unit control

PC board and local wiring for various controls (Remote

operations, Operation status display, Error status display),

Fan (fresh air) control or External heater control.

2.2. Parts and accessories

• The following installation parts are supplied.

Use them as required.

Name and shape

Installation manual

External connection PCB

Spacer

Wire with connector

EMI core

* Use of this item depends on the product. Please refer to the

installation manual of the indoor unit.

PART No. 9380828112

Q'ty

Description

This manual

For various

external input/

output connections

For attaching the

PCB

For attaching the

PCB

For connecting the

PCB

For mounting on

wire

En-1