Fujitsu UTZ-DUWBCA 설치 매뉴얼 - 페이지 2
{카테고리_이름} Fujitsu UTZ-DUWBCA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu UTZ-DUWBCA 2 페이지. Wind baffles
페이지 인쇄3.Installation Dimensions
When the wind baffles are used install units as shown in the illustrations below. Ensure minimum clearances are met to a wall
or other obstruction. When installing multiple units, ensure unit minimum clearances are met or exceeded.
Failure to provide minimum clearances will affect unit performance. Nuisance unit cycling or premature equipment failure may
result. For other installation clearances, referring to the unit installation manual.
(1) One unit Installation
Unit : in (mm)
Wall surface
20(500) or more
20(500) or more
(2) Multiple unit Installation Unit : in (mm)
Wall surface
20(500) or more
20(500) or more
20(500) or more
20(500) or more
20(500) or more
20(500) or more
4.Installation Instructions
(1) Remove existing screws as shown in Figure 1. (Do not lose the screws.) Using the same screws, locate and secure the wind
baffle as shown in Figure 2.
(2) Using the self-tapping screw provided, secure the wind baffle upper right corner as shown in Figure 3.
IMPORTANT- Use caution when installing ALL screws, as they must not be overtightened!
Figure 1
Figure 2
Figure 3