AEG 40809 사용자 지침 - 페이지 18

{카테고리_이름} AEG 40809에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 40809 40 페이지.

User's instructions

Products

Choice of detergent

Manufacturers always mark maximum detergent quantities to be used on

their detergent packages, depending on the amount of washing.

Comply with doses and instructions specified on packages.

The "Direct Spray" washing process reduces consumption of water and

detergents, consequently you should only use two thirds of the doses

recommended on packages by detergent manufacturers.

Proportioning

The quantity of detergent to be

used depends on the amount of

washing to be washed, the hard-

ness of the water and how dirty

your washing is.

Reduce doses slightly if the wa-

ter is soft. Increase doses slightly

if the water is hard, or if the

washing is very dirty or stained.

You can determine the degree

of hardness of your water by

asking the water distribution

utility in your region or any other competent authority.

Note: Only use low foam detergents sold in the shops specially for use in

washing machines. Use neutral products for washing woolens.

If you use liquid detergents, put the proportioning ball directly in the drum

and choose a program without pre-wash. If you dry your washing in a drier,

do not forget to take out the proportioning ball. You can also add liquid

detergent for your washing into the drum directly, provided that you do not

do a pre-wash and you start your washing machine immediately.

Liquid detergents are suitable for low temperatures (namely 30°C and 40°C).

It is recommended that a powder detergent should be used for higher

temperatures from 60°C to 90°C.

Water hardness in mmol/l

Hardness range

(millimoles per liter)

I - soft

II - medium

III - hard

IV- very hard

up to 1,3

1,3-2,5

2,5-3,8

more than 3,8