AEG 61300 지침서 - 페이지 30
{카테고리_이름} AEG 61300에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 61300 48 페이지. Washing machine
AEG 61300에 대해서도 마찬가지입니다: 지침서 (48 페이지)
페이지 인쇄
Operating Instructions
If the Washing Results are not Satisfactory
If the washing turns greyish and limescale deposits are present in
the drum
Insufficient washing powder has been added.
Incorrect washing powder was used.
Stains were not pretreated.
Program or temperature was not set correctly.
When using modular washing powders the individual components
were not used in the correct ratio.
If there are still grey stains on the washing
Washing soiled with ointments, grease or oils was washed with insuf-
ficient washing powder.
The temperature selected for the wash was too low.
A frequent cause is that fabric softener especially a concentrated one
has come into contact with the washing. Wash out these types of
stains as fast as possible and use the fabric softener carefully.
If after the final rinse foam is still visible
Modern washing powders can still cause foam in the final rinse cycle.
The washing is nevertheless sufficiently rinsed.
If there are white residues on the washing
These are insoluble contents of modern washing powders. They are
not the result of an insufficient rinse. Shake out the washing or brush
it off. Turn the washing inside out before washing it. Review your
choice of powder, possibly use liquid detergents.
30