AEG 645 사용 설명서 - 페이지 18

{카테고리_이름} AEG 645에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 645 24 페이지. Dishwasher
AEG 645에 대해서도 마찬가지입니다: 사용 설명서 (25 페이지), 사용 설명서 (40 페이지), 사용 설명서 (24 페이지)

페이지 인쇄

If you think your machine is not working properly

• If the machine is connected to a hot fill

supply (max. 60 °C) - only economical if

hot water is available 'nearly free of

charge" - do not use 50° C programmes to

allow detergent sufficient time to work.

• Did you top up the salt container? If the

water hardness in your area is over

10 degrees and your dishwasher is operat¬

ed without salt, the result may be affected

adversley and white and yellow chalk

deposits will remain on your dishes.

• Did you select the correct degree of water

hardness according to the information of

your local Water Authority? (See also

page 10.)

The dishes are not dry and sparkling?

• Did you use a rinse aid recommended

by us?

• Did you fill up the rinse aid container?

• Is the correct quantity of rinse aid being

dispensed?

Overdosing of rinse aid:

If too much rinse aid is used opaque or bluish

smears will apear. Reduce the output

Underdosing of rinse aid:

If too little rinse aid is used white/grey dried-on

water marks will appear. Increase the output

There are rust spots in the machine?

• The stainless steel tub, the inner door and

the filters cannot rust. If you find rust spots,

these are introduced with the water or due

to rust on cutlerly, saucepans, etc. Did you

select a rinse and hold programme or a

complete wash programme after filling the

salt container? Remove such stains with a

stainless steel cleaner.

Symbol £=> is illuminated

• Unless you live in water hardness area 1,

the salt container needs to be replenished.

For water hardness area 1 the light will be

on every time the machine is switched on.

No salt is required for water hardness

area 1 - see page 10.