AEG 7000 ProSteam 사용자 설명서 - 페이지 13

{카테고리_이름} AEG 7000 ProSteam에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 7000 ProSteam 48 페이지.
AEG 7000 ProSteam에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지)

~10mm

3.9 Preparation and assembly of the cupboard door

The dimensions of the cupboard door should be:

• width min. 595 - max. 598 mm;

• thickness 16-22 mm.

1. Remove the screws of the top cover on the

rear of the appliance and install the anti-

tilting device as shown in the drawing.

2. Adjust the anti-tilting device so that the

distance from the counter is 10mm. Loosen

the nut counterclockwise with a 3mm wrench.

Adjust the height and turn the nut clockwise

to fix it.

Factory pre setting

The appliance is originally pre set for the

assembly of a cupboard door opening from

right to left.

The best solution would be to

screw the upper hinge to the

upper hole of the top plate

and the lower hinge to the

lower hole of the bottom

plate.

ENGLISH