Fujitsu CELSIUS Mobile H 쉬운 매뉴얼 - 페이지 32
{카테고리_이름} Fujitsu CELSIUS Mobile H에 대한 쉬운 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu CELSIUS Mobile H 45 페이지. Esprimo mobile series
Ports and operating elements
Radio components: Wireless LAN/Bluetooth/UMTS
UMTS
Bluetooth
Wireless LAN
The installation of a radio component not approved by Fujitsu Technology Solutions GmbH
voids the permits issued for this device (see chapter
Switching the wireless components on and off
Start the WirelessSelector using the application key for the wireless components
or the key combination
The Wireless Selector software must already be installed.
With the WirelessSelector you can individually switch the wireless components
activated in BIOS Setup on or off.
UMTS
Bluetooth
Bluetooth
Wireless LAN
Wireless LAN
UMTS
► Press the application key for the wireless components to start the WirelessSelector.
or
► Press the key combination
The wireless component indicator will come on when one or more wireless
components are switched on.
If you switch off the wireless components, the Bluetooth module, UMTS/3G and
wireless LAN transmission unit (antenna) will also be switched off.
You can enable or disable the wireless components individually.
BIOS Setup allows you to specify which wireless components can be switched on and off
using the application key or the key combination
have been activated in BIOS Setup can be switched on and off using the application key
or the key combination
the BIOS setup cannot be controlled using the application key or the key combination.
You can also activate and deactivate the wireless components
individually in the BIOS Setup.
Pay attention to the additional safety notes for devices with wireless
components provided in the "Safety" manual.
Details on using Wireless LAN can be found in the online help system
included with the Wireless LAN software.
More detailed information on how to use Bluetooth can be found on
the "Drivers & Utilities"CD/DVD.
You can obtain more information on UMTS/3G from your service provider.
24
Fn
+
F1
.
Fn
+
F1
Fn
+
F1
"Technical data", Page
to start the WirelessSelector.
+
Fn
. Conversely, components which are deactivated in
A26391-K260-Z220-1-7619, edition 1
34).
. Only components which
F1