AEG 7000 Series 사용자 설명서 - 페이지 11
{카테고리_이름} AEG 7000 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 7000 Series 28 페이지.
AEG 7000 Series에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지), 사용자 설명서 (44 페이지), 사용자 설명서 (49 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (36 페이지)
페이지 인쇄
• Before using your freezer, wipe all parts with a solution of warm water and a teaspoon of
sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to the freezer
after cleaning.
• Use the adjustable front legs to make sure your appliance is level and stable. You can
adjust the legs by turning them in either direction. This must be done
before placing food in the appliance.
• Install the two plastic distance guides (the parts on the black vanes
-condenser- at the rear) by turning it 90° (as shown in the figure) to
prevent the condenser from touching the wall.
• The distance between the appliance and back wall must be a maximum
of 75 mm.
• For Side by Side niche installation please refer to the Joining Kit provided with the
cabinet freezer and its installation manual (NOTE: joining kit is also available separately
as accessory)"
Before using your freezer
• When using your freezer for the first time, or after transportation, keep it in
an upright position for at least 3 hours before plugging into the mains. This
allows efficient operation and prevents damage to the compressor.
• Your freezer may have a smell when it is operated for the first time. This is normal and
the smell will fade away when your freezer starts to cool.
Internal lighting
WARNING!
Risk of electric shock.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These
lamps are intended to withstand extreme physical conditions in household appliances,
such as temperature, vibration, humidity, or are intended to signal information about
the operational status of the appliance. They are not intended to be used in other
applications and are not suitable for household room illumination.
EN - 11 -